750 kV断路器现场交流耐压试验系统研究与应用 

温定筠，乔立凤，江峰，王成生，孙亚明，吕景顺 
甘肃省电力公司电力科学研究院，甘肃 兰州 730050 
 

摘 要：介绍了750kV断路器现场交流耐压试验的标准和时序，分析了基于串联谐振原理的试验方法及试验系统中各设备的具体参数。在此基础上配置出成套的750kV断路器现场交流耐压试验系统，通过实例成功完成了750kV断路器主回路及断口的交流耐压试验。

关键词：断路器；交流耐压；品质因数；串联谐振

中图分类号：TM561 文献标识码：B 文章编号：1007-3175(2013)06-0050-04

Site AC Voltage Withstand Test System Study and Application of 750 kV Circuit Breakers 

WEN Ding-jun, QIAO Li-feng, JIANG Feng, WANG Cheng-sheng, SUN Ya-ming, LV Jing-shun 
Gansu Electric Power Research Institute, Lanzhou 730050, China 
 

Abstract: Introduction was made to the standard and time sequence of site AC voltage withstand test of 750kV circuit breakers. Analysis was made to the test methods based on serial resonance principle and actual parameters of different equipment in test system. On the basis of this, the site AC voltage withstand test system of a set of 750kV circuit breakers was disposed. The actual example shows that the AC voltage withstand test for the main circuit and breaking outlet of 750kV circuit breakers could be completed successfully.
Key words: circuit breaker; AC voltage withstand; quality factor; serial

参考文献
[1] 孙志强，曲芳.交流耐压试验现场接线分析[J].电工技术，2012(4)：63-64.
[2] 李建基.高压断路器可靠性调查[J].电工电气，2010(6)：58-59.
[3] 刘文革，张明.800kVGIS断路器气体绝缘破坏原因分析[J].中国电力，2009，42(8)：87-89.
[4] 王耀龙.试验接线对断路器高压试验的影响[J].电工电气，2012(7)：47-49.
[5] 甘景福，叶朝锋，袁燕岭，等.电缆串联谐振试验自动计算与设计软件开发[J].电工电气，2012(5)：53-56.
[6] 陈天翔，王寅仲，海世杰.电气试验[M].2版.北京：中国电力出版社，2008.