Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 往年索引

变电站预制舱式高压室结构研究与应用

来源:电工电气发布时间:2023-07-27 11:27 浏览次数:451

变电站预制舱式高压室结构研究与应用

孟晨旭,陈伟明,罗其锋,刘文平,陈伟雄
(南方电网广东中山供电局,广东 中山 528400)
 
    摘 要:建成后的传统变电站高压室结构单一,缺少防尘保温、运行环境控制、设备监视等功能。提出一种新型的变电站预制舱式高压室结构,该结构的设备舱体与电气设备在设备厂完成安装调试后到达现场快速拼装,实现节约建设成本,提高建设效率的目的,通过在密闭的舱体内增加通风系统与空调系统,舱体采用保温隔热材料,并在开关柜前后设置巡视机器人及其运行轨道,实现预制舱防尘保温、运行环境控制、设备监视等功能,为电力设备提供良好的运行环境,也为检修维护工作提供便利。经 110 kV 同福站的实际应用,验证了该结构的实用性和有效性。
    关键词: 变电站;预制舱式高压室;双层结构;多功能
    中图分类号:TM63     文献标识码:B     文章编号:1007-3175(2023)07-0056-05
 
Research and Application of a Prefabricated-Cabin Type High-Voltage
Chamber Structure for the Substation
 
MENG Chen-xu, CHEN Wei-ming, LUO Qi-feng, LIU Wen-ping, CHEN Wei-xiong
(Zhongshan Power Supply Bureau of China Southern Power Grid in Guangdong, Zhongshan 528400, China)
 
    Abstract: The traditional substation has the single-structured high-voltage chamber which lacks functions like dust prevention, heat preservation,operation environment control, equipment monitoring and so on. The paper proposes a new prefabricated-cabin type high-voltage chamber structure for the substation. The cabin and electrical equipments of this structure first can be installed and debugged in the equipment factory, and then be assembled rapidly when arriving at the site, which realizing the goal of saving construction costs and improving construction efficiency. Through adding ventilation system and air conditioning system in the closed cabin, using the thermal insulation material to produce the cabin, setting patrol robots and their running tracks in front of and behind the switch cabinet, this high-voltage chamber can have functions like dust prevention, heat preservation, operation environment control, equipment monitoring and so on. It provides not only great operation environment for power equipments, but also convenience for repair and maintenance. The application in 110 kV Tongfu station verifies the practical effectiveness of this structure.
    Key words: substation; prefabricated-cabin type high-voltage chamber; double-layer structure; multifunction
 
参考文献
[1] 邹平丽. 传统土建新能源变电站与模块化预制舱变电站对比分析[J]. 机电信息,2020,27(15):38-39.
[2] 彭朝钊,程凌飞,刘邦海,等. 智能变电站预制舱式二次组合设备舱体环境控制优化研究[J] . 电力系统保护与控制,2017,45(19):143-147.
[3] 韩煦.35 kV 高压室开关柜因潮湿引发的故障[J] .电世界,2017,58(10):15-16.
[4] 余接永. 变电站高压室的防潮除湿治理[J] . 电力安全技术,2011,13(6):67.
[5] 范强, 戴宇, 胡挜喆, 等. 高压配电室温度与湿度的智能调节系统研究[J] . 广东电力,2018,31(12):147-152.
[6] 凤俊敏,顾焱,吴竹祥,等. 智能环境控制系统在地下配电站中的应用研究[J] . 华东电力,2013,41(10):2127-2131.
[7] 狄谦,谢晓磊,康雪晶,等. 预制舱式模块化变电站关键技术研究[J] . 电气应用,2019,38(12):57-61.
[8] 顾铭飞,袁涤非. 变电站模块化建设中的组合式预制舱技术[J]. 华电技术,2018,40(4):40-44.
[9] 蔡晶,许成昊,林清如,等. 预制舱式变电站设计及应用探索[J]. 广东电力,2019,32(8):9-16.
[10] 王相杰.10 kV 高压室的电气安装施工管理及质量控制[J]. 电子世界,2012(16):60.